944Turbo for BJ/SB/Thing

Wednesday, May 11th, 2011

This kit adapts 87-89 944 Turbo hubs and disks (front mount) to a BJ/Super/Thing spindle. Since the 944 bearings are larger than the stock beetle, bearing spacers are employed to make the hub fit onto the T1 spindle. The spacers are a shrink-fit onto the944 hub and machined for beetle bearings/seals.  No spindle mods are required for the caliper bracket.  Offset increase is +13mm per side.  Please send YOUR core hubs to VdubEngineering for machining.  They will be returned with machined and ready to go, with bearing races installed, bearings/seals provided (Made in Germany), caliper brackets, hardware and instructions. The machining take about 4-8 weeks, but please inquire for current turnaround estimates. Your will require the use of 87-89 944 Turbo rotors and calipers (not included).

$c540.

Posted in Type 1/3 | Comments Off on 944Turbo for BJ/SB/Thing

RX7 Caliper kit for 63-70 Bus

Wednesday, May 11th, 2011

Bolt-on bracket kit RX7for 63-70.  Fits 15″ wheels. Requires 944NA hub/rotor (83-85) and Uses Rx7 4 piston caliper (88-92 or 93-95). Offset increase of +7.5mm over stock brakes.

$C160

Posted in Type 2 | Comments Off on RX7 Caliper kit for 63-70 Bus

Boxster/BoxsterS to Bay Bus

Wednesday, May 11th, 2011

Bracket kit for Boxster or Boxster S  brakes for your 71-72 or 73-79 Bus. Bracket bolts onto spindle. Includes brackets, hardware, bearing spacers, grease seals and full instructions. You will need to send  your 83-85 944NA hub to VdubEngineering for machining .  Rotor and caliper NOT included. Three options:

a) Use Boxster S caliper (reds) and rotor(318×28) from a 2000-2008 Boxster S.  Requires 17″ wheels.

b) Use Boxster caliper (blacks) and rotor (299×24) from 1997-2004 Boxster.  Requires 16″ wheels.

$C180

Posted in Type 2 | Comments Off on Boxster/BoxsterS to Bay Bus

Wilwood/944 Brakes for 63-70 Bus

Wednesday, May 11th, 2011

Bracket kit for 944 brakes for your 63-70 Bus. No mods required, completely bolt on. Includes everything shown in the pictures, with full instructions. You will need 83-85 944NA rotor and hub to complete install (not included). Use wilwood dynalite caliper (120-6811 or 120-6806 recommended but you can use others, caliper not included). Requires 15″ wheels.  Offset increase of +7.5mm over stock brakes.

$C160

Posted in Type 2 | Comments Off on Wilwood/944 Brakes for 63-70 Bus

944 Turbo kit for 63-70 Bus

Wednesday, May 11th, 2011

Bolt on kit that allows the use of Turbo brakes (4 piston brembos) brakes on 63-70 Bus drum spindles (stock or flipped). Includes caliper brackets (CAD designed and laser cut), bearing spacers, seals, all hardware and instructions. No spindle mods required. Easy install. NOT included but required to complete install are 86 944Turbo front hubs and rotors, and 86-89 944Turbo front caliper. Requires 16″ wheels.  Offset increase of +7.5mm over stock brakes.
$c160

Posted in Type 2 | Comments Off on 944 Turbo kit for 63-70 Bus

944NA kit for 63-70 Bus

Wednesday, May 11th, 2011

Bolt on kit that allows the use of 944NA (83-85) brakes on 63-70 Bus drum spindles (stock or flipped). Includes caliper brackets (CAD designed and laser cut), bearing spacers, seals, all hardware and instructions. No spindle mods required. Easy install. NOT included but required to complete install are 84-85 944NA rotors, hubs and calipers. Requires 15″ wheels. Offset increase of +7.5mm over stock brakes.

$c160

Posted in Type 2 | Comments Off on 944NA kit for 63-70 Bus

Bus Master Cylinder Adapter

Wednesday, May 11th, 2011

Precision machined from billet aluminum, this adaptor allows you mount a Porsche 944 master cylinder to your 67 and earlier bus (T2). The adaptor is machined to allow the use of a stock bus pushrod, aswell as position the resevoir of the 944 master cylinder directly under the acess hole in the floor. The ‘nose’ of the adaptor is machined to mimick a stock bus master cylinder, with a groove to insure a tight seal to the rubber boot. Proper metric grade fasteners are included.

Also available, an adaptor to adapt a 72-79 bus master cylinder to an 67 or earlier bus.

$C50/ Kit. (Note rubber boot not included)

Posted in Type 2 | Comments Off on Bus Master Cylinder Adapter