944 Turbo brakes on T3 spindle

Friday, December 30th, 2011

This kit adapts 87-89 944T brake components to the stock Type 3 disk spindle. The hubs are modified to take T3 bearings and stock beetle grease seals. The spindles require a significant amount of machining to mount the caliper. The spindle will no longer be able to take stock T3 components. Offset increase of the brakes is 13mm per side.

The kit included machining of YOUR of your 944 hubs to take beetle bearings, fabrication of two caliper brackets, machining of YOUR spindles to accept the caliper bracket, installed German bearings and all required fasteners.

$c600

Posted in Type 1/3 | Comments Off on 944 Turbo brakes on T3 spindle

Wilwood/944 Brakes for Bay Bus

Monday, December 26th, 2011

Bracket kit for 944 brakes for your71-72 or 73-79 Bus. No mods required, completely bolt on. Includes everything shown in the pictures, with full instructions. You will need 83-85 944NA rotor and hub to complete install (not included). Use wilwood dynalite caliper (120-6811 or 120-6806 recommended but you can use others, caliper not included). Requires 15″ wheels

$C160

Posted in Type 2 | Comments Off on Wilwood/944 Brakes for Bay Bus