944T on Bus

44 Turbo brake Kit for T2’s

This kit adapts early turbo (T) Porsche 944 front brakes to a Type II (T2) spindle. You will require the use of 944T calipers, 944 ‘86 only hub, and 944 ‘86 only front rotors.

The kit includes bearing spacers which are required to mount the Porsche hub to the T2 spindle. The bearing spacers are manufactured from 6061T6 aluminum. The 944 hub is unmodified and uses standard 944 (same as T2) bearings. The hub, disk and caliper are standard 944 items and are not included in the kit. The caliper bracket is manufactured from steel and bolts to the stock spindle with no spindle modifications.

The kit includes 2 inner bearing spacers,2 outer bearing spacers, 2 caliper brackets, all required hardware (metric Grade 10.9) and special grease seals.

(Components included in is pictured on left. Mounted disk and caliper on T2 spindle.)

Technical Specifications:

(For reference only; hub, caliper and rotor are not included in kit).

Disk 298mmx28mm 298mmx28mm
Caliper Brembo 4 piston Brembo 4 piston
Hub ‘86 944 T ‘86 944 T
Spindle T2 63.5-67 T2 68-70
Offset change (side) ? ?
Bolt pattern 5-130mm 5-130mm
Part Number VDE-010-029 VDE-010-030

(For 71-79 BJ Bus, Use 68-70 drum spindle and above kit.)

vDub Engineering © Copyrigh 2011 All Rights Reserved